Aerial device – 13M, 1 bucket is a hydraulic equipment with an insulating boom, for aerial maintenance work in energized locations; equipped with two buckets liners made of insulating material; with controls in the buckets and at the base, with priority for those at the base, fully complying with Annex XII of NR-12.
Reference | Descrição |
PA0100002 | Aerial device – 13M, 1 Bucket Linear |
Working height | 13,67m | |
Ground height to bucket liner edge | 13,17m | |
Maximum capacity per bucket liner | 136,00kg | |
Ground height to platform | 1,00m | |
Horizontal reach arm at vertical | 1,12m | |
Horizontal reach | 6,00m | |
Number of A-stabilizing pads | 02 | |
Oil reservoir | 40L | |
Lower arm opening angle | 0-120° | |
Upper arm opening angle | 0-180° | |
Rotation system | Infinito | |
Maximum working pressure | 175BAR | |
Approximate equipment weight | 1.600kg |
Item | Unit | Reference | Description |
01 | pç | PA0100007 | Supplementary cabin |
TECMARQUES equipment fully complies with the standards established in Annex XII of NR 12. Below are the items addressed in the EQUIPMENT. | ||||
Anchorage point for a parachute-type safety belt; | ||||
Lower and upper controls for the operation of the winch and pressure valve for load limitation on aerial baskets equipped with a winch and JIB for material lifting, if this accessory is requested. Safety locking device to prevent inadvertent actuation of the upper controls; Upper controls on your side of the bucket, easily accessible to the operator. | ||||
Easily accessible lower controls provided with means to prevail over the upper control of the bucket movement; Emergency stop device in the upper and lower controls that work in both cases. | ||||
Check valves in the hydraulic cylinders of the stabilizer feet and holding valves with counterbalance in the hydraulic cylinders of the moving arm to prevent undesired movements in case of pressure loss in the hydraulic system; | ||||
Stabilizer system, with installed tilt indicator in a location that allows for viewing during stabilizer operation, to show if the equipment is positioned within tilt limits. | ||||
Stabilizer controls protected against inadvertent use, which return to the neutral position when released by the operator, located at the base of the mobile unit, so that the operator can see the stabilizers in motion; Selector valve, next to the stabilizer control, which in one position blocks the activation of the stabilizers and in the other position the movement controls the bucket(s). |
||||
Emergency operation function that allows the rotation of the arms and tower in case of hydraulic hose rupture. | ||||
Grounding point. |
Reference | Descrição |
PA0100002 | Aerial device – 13M, 1 Bucket Linear |
Working height | 13,67m | |
Ground height to bucket liner edge | 13,17m | |
Maximum capacity per bucket liner | 136,00kg | |
Ground height to platform | 1,00m | |
Horizontal reach arm at vertical | 1,12m | |
Horizontal reach | 6,00m | |
Number of A-stabilizing pads | 02 | |
Oil reservoir | 40L | |
Lower arm opening angle | 0-120° | |
Upper arm opening angle | 0-180° | |
Rotation system | Infinito | |
Maximum working pressure | 175BAR | |
Approximate equipment weight | 1.600kg |
TECMARQUES equipment fully complies with the standards established in Annex XII of NR 12. Below are the items addressed in the EQUIPMENT. | ||||
Anchorage point for a parachute-type safety belt; | ||||
Lower and upper controls for the operation of the winch and pressure valve for load limitation on aerial baskets equipped with a winch and JIB for material lifting, if this accessory is requested. Safety locking device to prevent inadvertent actuation of the upper controls; Upper controls on your side of the bucket, easily accessible to the operator. | ||||
Easily accessible lower controls provided with means to prevail over the upper control of the bucket movement; Emergency stop device in the upper and lower controls that work in both cases. | ||||
Check valves in the hydraulic cylinders of the stabilizer feet and holding valves with counterbalance in the hydraulic cylinders of the moving arm to prevent undesired movements in case of pressure loss in the hydraulic system; | ||||
Stabilizer system, with installed tilt indicator in a location that allows for viewing during stabilizer operation, to show if the equipment is positioned within tilt limits. | ||||
Stabilizer controls protected against inadvertent use, which return to the neutral position when released by the operator, located at the base of the mobile unit, so that the operator can see the stabilizers in motion; Selector valve, next to the stabilizer control, which in one position blocks the activation of the stabilizers and in the other position the movement controls the bucket(s). |
||||
Emergency operation function that allows the rotation of the arms and tower in case of hydraulic hose rupture. | ||||
Grounding point. |